Yes, a magnetic power bank can charge through a phone case, if the case is magnetic. Anker's own product pages are specific: non-magnetic cases, thick cases, and metal or magnetic attachments all get in the way. Below are Anker's case notes for its two magnetic batteries, quoted word for word, and what to do if your case is the problem.
What Anker says, word for word
Anker 622 Magnetic Battery (MagGo), from the FAQ on Anker's product page:
"The power bank supports 7.5W max wireless charging for iPhone 12 and later models. It’s not compatible with Android phones. Cases thicker than 2.5 mm and non-magnetic cases may reduce charging efficiency."
Anker 633 Magnetic Battery, from two places on Anker's product page:
"Use the Right Cases: For best results, use only iPhone-compatible magnetic phone cases. Magnetic and metal attachments or cards will cause a weak magnetic attraction."
"Not compatible with non-magnetic phone cases, such as OtterBox defender cases. Magnetic and metal attachments such as cards, keys, and pop grips will interfere with charging."
Those are the only case rules Anker publishes on these two pages. We won't add thickness limits or brand lists that Anker doesn't give.
What that means in practice
Reading the two pages together, three things matter:
- Is the case magnetic? Both pages point to iPhone-compatible magnetic cases. The 633 page says it's "not compatible" with non-magnetic cases. The 622 page says non-magnetic cases "may reduce charging efficiency."
- How thick is it? Only the 622 page gives a number: cases thicker than 2.5 mm may reduce charging efficiency. Anker's 633 page doesn't give a thickness figure, so we won't give one either.
- Is anything between the phone and the battery? The 633 page lists cards, keys and pop grips as interfering. If you keep a card wallet or a grip on the back of your phone, take it off before you snap on the battery.
Neither page names a case brand that works, and we don't either. The one brand Anker mentions, OtterBox Defender, is named as an example of a non-magnetic case the 633 is not compatible with.
A quick check before you buy
You can answer most of this yourself in a minute:
- Check what's on the back. A card sleeve, ring, grip or metal plate is the kind of attachment Anker says interferes.
- Thick, rugged case? On the 622, Anker's 2.5 mm note applies. If your case is clearly bulky, a magnetic battery may not be the right fit for that case.
- Android phone? Anker says the 622 isn't compatible with Android phones. Its case notes for the 633 refer only to iPhone-compatible magnetic cases.
If your case is the problem: charge by cable instead
If you don't want to change cases, the 633 still works as a regular power bank. Anker's 633 page says devices can use 20W USB-C and 18W USB-A wired charging, or 7.5W wireless charging. A cable connection doesn't care what case you use.
Pick the cable for your phone's port:
- USB-C iPhone: a USB-C to USB-C cable.
- Lightning iPhone: the Anker 641 USB-C to Lightning Cable (Flow, Silicone), $16.99–$18.99.
The 622 has one USB-C port. Anker's spec sheet lists a USB-C output of 5V⎓2.4A and 12W max total output. For a cable fallback, though, the 633 is the stronger pick: Anker lists two ports and up to 20W wired over USB-C.
Which magnetic battery fits your setup
| Anker 622 Magnetic Battery (MagGo) | Anker 633 Magnetic Battery | |
|---|---|---|
| Price on our store | $47.99 | $45.99 |
| Capacity (Anker) | 5,000mAh | 10,000mAh |
| Wireless output (Anker) | 7.5W max | 7.5W max |
| Wired output (Anker) | USB-C 5V⎓2.4A (12W max total) | 20W USB-C, 18W USB-A |
| Anker's case note | Cases thicker than 2.5 mm and non-magnetic cases may reduce charging efficiency | Not compatible with non-magnetic cases; cards, keys and pop grips interfere |
| Size (Anker) | 4.13 × 2.62 × 0.50 in | 4.21 × 2.61 × 0.71 in |
Prices as of Oct 19, 2026.
Choose the 622 if you already use a slim magnetic case and want the thinner battery.
Choose the 633 if you sometimes switch to a non-magnetic case, or want to charge a second device. Its USB-C and USB-A ports give you a cable fallback.
For a full side-by-side, read our Anker 622 vs 633 comparison. If you're weighing the 622's fold-out stand for everyday carry, see our MagGo everyday-carry guide.
Two more things Anker notes
Warm is normal. Anker's 622 FAQ says: "It's normal for both the power bank and phone to heat up during wireless charging due to power loss. For safety, we recommend maintaining the power bank's temperature within 118°F (48℃)."
Expect fewer charges than the capacity number suggests. Anker's 622 FAQ attributes reduced capacity during charging to "a 35% to 45% energy loss in the battery cells and conversion circuitry." For estimates, Anker gives this formula: (power bank capacity × 0.6) ÷ device battery capacity ≈ number of charges.
The short version
- Magnetic case, nothing stuck to the back: a magnetic battery should snap on and charge.
- Non-magnetic case, or one thicker than 2.5 mm: Anker says the 633 isn't compatible with non-magnetic cases, and the 622 may charge less efficiently. Use a cable, or switch cases.
- Android: Anker says the 622 isn't compatible.
Order notes
Anker tech ships free to the contiguous U.S., no minimum. 30-day returns, conditions apply.