If you want a magnetic power bank that also props your iPhone up hands-free, both Anker batteries we carry do it. The Anker 622 (MagGo) is the thin one to leave on the phone all day. The Anker 633 is the one to carry in a bag for long days out and travel, with more capacity and a second wired port.
This post is about carrying a stand with you: how you'll use it away from home and which battery suits each kind of day. If your main question is capacity (5,000 vs. 10,000mAh), our Anker 622 vs 633 comparison covers that in detail. For power banks in general, including cable-only models, see our Best Portable Charger for iPhone guide.
What the stand does on each model
Anker describes the stands this way:
- Anker 622: "Prop It Up" is a built-in foldable kickstand that keeps your iPhone upright "for a comfortable viewing angle."
- Anker 633: a "dedicated foldable stand" that provides "stable hands-free phone viewing" while the battery charges your phone.
On both, the battery snaps magnetically onto the back of the iPhone, and the stand folds out from the battery. You charge and prop the phone up at the same time. Anker's product photos show the 633 propping the phone both upright and sideways, and the 622 upright.
Match the battery to your day
Commuting, errands and a phone that stays in your hand: the 622
The 622 is 0.50 inches thick (4.13 × 2.62 × 0.50 in), and Anker says it's slim enough to take calls and selfies one-handed. That makes it the one to leave attached. When you sit down, fold out the kickstand to watch something or follow a recipe; when you get up, fold it away and keep going.
Its 5,000mAh capacity suits a top-up rather than several full charges. Anker's own estimate is that a fully charged 622 delivers about 2,750 to 3,250mAh to your phone.
Flights, trains and long days out: the 633
On a tray table, a café counter or a waiting-room seat, the 633's stand turns the phone into a small hands-free screen, and its 10,000mAh gives you more margin than the 622. It also has wired ports (USB-C rated at 20W and USB-A at 18W), so a second device can charge by cable.
When you find an outlet at a gate or a café, pass-through charging helps (Anker lists it on both models): Anker says its USB-C Power Delivery port lets it "charge itself and any compatible handheld device at the same time." Plug it in, keep the phone snapped on and propped up, and both refill while you wait.
It's thicker (0.71 in) and heavier (7.68 oz, or 218 g, per Anker), so it rides in a bag rather than on the phone in your pocket. If carry weight matters more than capacity, the 622 still does the job for a shorter trip.
A stand you carry vs. a stand that lives on your desk
These batteries are built for wherever you happen to be: they're a power bank first and a stand second, and the stand folds away when you move on. If what you want is a permanent charging stand for a home-office desk, that's a different kind of product.
Side-by-side: the specs that matter for hands-free use
All specs are from Anker's U.S. product pages.
| Anker 622 (MagGo) | Anker 633 | |
|---|---|---|
| Stand | Built-in foldable kickstand | Dedicated foldable stand |
| Wireless output | 7.5W max (iPhone 12 and later) | 7.5W max |
| Charges phone while recharging itself | Yes, per Anker (pass-through charging; Anker notes a device on the cable gets priority over one charging wirelessly) | Yes, pass-through charging |
| Wired ports | 1 USB-C (in/out, 5V⎓2.4A) | 1 USB-C + 1 USB-A |
| Recharge input | 5V⎓2.4A; Anker recommends a 12W charger | Up to 9V⎓2.22A; about 1.8 hours (Anker internal lab testing) |
| Thickness | 0.50 in | 0.71 in |
| In the box | 23.6 in (60 cm) USB-C to USB-C cable | 2 ft (0.6 m) USB-C to USB-C cable |
Recharging the battery: one charger covers both
The Anker Nano Charger (30W) has a single USB-C port with 30W max output. That's more than either battery draws: the 633 takes up to 9V⎓2.22A (about 20W) and the 622 takes 5V⎓2.4A (12W), which is the charger size Anker recommends for it. Both batteries include a USB-C to USB-C cable; the Nano doesn't include one. For why a 30W charger is this small, see GaN Charger 101.
Get a good magnetic connection
The stand only helps if the battery stays put and charges well. Anker's guidance:
- Use a magnetic (MagSafe-compatible) case, or no case. Anker says the 633 isn't compatible with non-magnetic cases such as OtterBox Defender cases. For the 622, cases thicker than 2.5 mm and non-magnetic cases may reduce charging efficiency.
- Remove cards, keys, pop grips and metal attachments from between the phone and the battery. Anker says they interfere with charging.
- Expect some warmth. Anker says it's normal for both the battery and the phone to heat up during wireless charging, and recommends keeping the power bank's temperature within 118°F (48°C).
- If charging stops at 80%, Anker notes that iOS 17 may pause charging at 80% to protect the battery from heat. Charging resumes once the phone cools; moving it somewhere cooler helps.
Which phones they fit
Anker lists 7.5W wireless charging for iPhone 12 and later on the 622 and states that the 622 isn't compatible with Android phones. The 633 snaps onto MagSafe-compatible iPhones the same way. Android owners can still charge from the 633's wired ports with a cable.
Quick answer
- Leave it on the phone and prop it up wherever you sit: Anker 622 (MagGo).
- Carry more charge for flights, trains and long days out: Anker 633.
- Recharge either one: Anker Nano Charger (30W).
Anker tech ships free to the contiguous U.S., no minimum. 30-day returns, conditions apply.
Related reading: Anker 622 vs 633 · Best Portable Charger for iPhone · Is a 30W Charger Enough? · Anker 715 vs 735 · GaN Charger 101