To get Samsung Super Fast Charging, you need a USB-C charger that supports USB Power Delivery PPS (Programmable Power Supply), a cable that meets the charger's requirements, and the Fast charging setting turned on. Wattage alone doesn't do it. Samsung's support guidance says that even a charger with a high maximum output may not provide Super fast charging if it doesn't support PPS.
The Anker Nano Charger (30W) lists PPS on its spec sheet, and Anker says it's compatible with Samsung's 25W Super Fast Charging. Pair it with a USB-C to USB-C cable.
What PPS is, in plain terms
USB Power Delivery (PD) is the USB-IF's standard for fast charging over USB-C. Standard PD charging works in fixed steps; Samsung describes it as charging "with set voltage and current," which on a spec sheet looks like 5V, 9V, 15V or 20V. PPS was added in USB PD 3.0, and Samsung describes it as charging that "adjusts voltage and current in real-time based on device charging status." In other words, the phone can request finer adjustments as it charges instead of choosing from a few fixed levels.
Samsung tells Galaxy owners to check for PPS support, not only wattage, before expecting Super fast charging. That's why two 30W chargers can charge the same Galaxy at different speeds: one with PPS can enable Super Fast Charging, and one without it may not.
How to check a charger's spec sheet for PPS
Look for a line that says "PPS" followed by a voltage range and a current. Here's how it appears on Anker's page for the Nano Charger (30W):
| Output | Anker's listed spec |
|---|---|
| USB-C (standard PD) | 5V⎓3A / 9V⎓3A / 15V⎓2A / 20V⎓1.5A (30W max) |
| PPS | 3.3–11V⎓3A max (30W max); 3.3–16V⎓2A max (30W max) |
For comparison, Samsung lists its own 25W charger (EP-T2510) with PPS ranges of 3.3–5.9V at 3A and 3.3–11.0V at 2.25A. If a charger's page doesn't mention PPS at all, don't assume it has it.
Which Super Fast Charging level do you need?
Samsung's support page lists several levels, matched to its own chargers:
- Super fast charging: Samsung's 25W PD charger (EP-T2510).
- Super fast charging 2.0: Samsung's 45W charger (EP-T4511), based on use with a 45W, 5A cable. Samsung notes that Galaxy S25 and later models support it with the 3A cable included with the phone.
- Super fast charging 3.0: Samsung's 60W charger (EP-T6010), based on use with a 60W, 3A cable.
Samsung also says the supported level varies by Galaxy model, so check your phone's specs.
The Anker Nano Charger (30W) tops out at 30W, and Anker states compatibility with Samsung's 25W Super Fast Charging. It isn't a 45W or 60W charger, so it won't deliver Super Fast Charging 2.0 or 3.0 speeds. For more on whether 30W covers your devices, see Is a 30W Charger Enough?
The cable matters too
Samsung's guidance says cable requirements vary with the charger's maximum output, and a cable that doesn't meet the required spec may stop the charger from delivering its full output. It also warns that some third-party cables with higher electrical resistance can make charging stop intermittently.
Pick a USB-C to USB-C cable that supports USB Power Delivery and meets your charger's requirements.
Turn on Fast charging on the phone
Samsung's steps:
- Open Settings and tap Battery.
- Tap Charging settings.
- Turn on Fast charging.
Samsung notes that on Galaxy S23 series models and later, Fast charging and Super fast charging are combined under that single Fast charging toggle. Fast charging won't activate when the phone is plugged into a PC or a standard USB port.
Why it might still charge slower than you expect
Samsung lists a few normal reasons:
- Heat. If the phone or charger warms up from use or a hot room, charging speed may drop to protect the device.
- Battery level. The phone doesn't charge at maximum power the whole time; the current varies with how full the battery is.
- Screen on. Samsung says turning the phone off or keeping the screen off while charging helps maximize speed.
- A loose connection. Push the cable fully into the charger and the phone.
What about charging in the car?
The Anker PowerDrive III Duo has two USB-C ports at 20W max each (40W total). Anker says its PowerIQ 3.0 supports USB-C Power Delivery and Qualcomm Quick Charge. Its spec sheet does not list PPS, and Anker's compatibility note says it works with the Galaxy Note 10 and Note 10+ but doesn't support their 25W fast charging. Expect fast charging in the car, but not Samsung Super Fast Charging speeds. It's a good fit for charging two phones at once on a drive.
Quick setup
- At home or the office: Anker Nano Charger (30W) (PPS listed; cable not included) + a USB-C to USB-C cable.
- In the car: Anker PowerDrive III Duo + a USB-C to USB-C cable (cables not included).
- On the phone: Settings > Battery > Charging settings > Fast charging on.
Anker tech ships free to the contiguous U.S., no minimum. 30-day returns, conditions apply.
Charger and cable specs are from Anker's U.S. product pages. Super Fast Charging requirements are from Samsung's support guidance. Supported charging levels vary by Galaxy model.
Related reading: Is a 30W Charger Enough? · GaN Charger 101 · Anker 715 vs 735 · Anker 622 vs 633