The short answer: pick one outlet in a shared spot, put a multi-port charger on it, and leave one cable per device plugged in and ready. In our range, the Anker 735 Charger (Nano II 65W) is the natural center: it has two USB-C ports and one USB-A port, so three devices can charge from one outlet. Add an Anker Nano Charger (30W) for each extra device, and match each cable to the device’s port: USB-C for iPhone 15 and later and USB-C Android phones, Lightning for iPhone 14 and earlier. For Lightning iPhones, that’s an Anker 641; USB-C devices can use a USB-C to USB-C cable (the one that came with the device usually works).
This guide walks through it in order: count your devices and connectors, choose the spot, share the ports, pick cable lengths and colors, add a grab-and-go battery, and set a few house rules so the station keeps working. Short on time? Jump to the checklist.
Why one shared spot beats a brick in every room
Most homes collect chargers one device at a time, and they end up spread across bedrooms, the kitchen and the car. A single family charging station fixes three everyday problems:
- Nobody hunts for a cable. Every device has a cable waiting in the same place.
- Fewer outlets in use. One multi-port charger can handle what three single-port bricks used to.
- It builds a habit. Devices with a home get charged on the way in the door.
Step 1: Count devices and connectors
List every device that will charge at the station and note the port it uses.
Which connector does each device use?
- iPhone 15 and later: USB-C. Apple says iPhone 15 and later models have a USB-C connector. These use a USB-C to USB-C cable.
- iPhone 14 and earlier: Lightning. Apple’s fast-charging page says to use a USB-C to Lightning cable with an earlier iPhone model.
- Android phones with a USB-C port: a USB-C to USB-C cable.
- Tablets: check the port. A tablet with a USB-C port uses a USB-C to USB-C cable; an older iPad with a Lightning port uses a USB-C to Lightning cable.
- Earbuds and small gear: check the case. Some older items use a USB-A cable.
A Lightning port is a narrow slot; USB-C is a slightly wider oval. If you can’t tell which one a device has, check the plug on the cable it came with before you buy anything new.
Write it down
A family of four might end up with a list like this:
| Device | Port |
|---|---|
| Parent’s phone (iPhone 16) | USB-C |
| Parent’s phone (USB-C Android) | USB-C |
| Teen’s phone (iPhone 13) | Lightning |
| Family tablet (USB-C) | USB-C |
| Earbuds case (older model) | USB-A cable |
That’s five devices, but they rarely all charge at once. Plan ports for the busiest hour, usually the evening, not for the total count.
Step 2: Choose the spot
Put the station where people already drop their things: a kitchen counter, an entry table or a shelf near an outlet. Then check these points:
- Near an outlet, not across a walkway. A cable across the floor gets tripped over and pulled out of the device.
- Out of direct sun and away from heat. Apple says iPhone, iPad and Apple Watch work best at 32° to 95° F (0° to 35° C) ambient temperatures, and that charging in high ambient temperatures can do further damage.
- Away from the sink and the stove.
- Open air, not a closed drawer, with room for devices to lie flat instead of dangling from the cable.
Step 3: Share the ports on one charger
A multi-port charger lets several devices share one outlet, but it divides the power between the ports.
The Anker 735: three devices, one outlet
The Anker 735 Charger (Nano II 65W) has two USB-C ports and one USB-A port. Our product page says it delivers 65W max to a single device and shares power when three devices are connected. Here’s how Anker splits it:
| Ports in use (Anker’s figures) | What each port gets |
|---|---|
| One port | USB-C 1: 65W max · USB-C 2: 65W max · USB-A: 22.5W max |
| USB-C 1 + USB-C 2 | 45W max + 20W max |
| USB-C 1 + USB-A | 40W max + 22.5W |
| USB-C 2 + USB-A | 12W max + 12W max |
| All three | USB-C 1: 40W max · USB-C 2: 12W max · USB-A: 12W max |
Three simple rules come out of that table:
- Give USB-C 1 to the hungriest device. It keeps the biggest share in every combination, so it’s the port for a tablet or the phone that needs the quickest top-up.
- Use USB-C 2 for the second phone. With two USB-C devices, it gets up to 20W.
- Save USB-A for small things. Earbuds and other low-power gear are a good fit. When all three ports are busy, USB-C 2 and USB-A each drop to 12W max, so expect slower charging for those two until the third device comes off.
The 735 doesn’t come with a cable, and the USB-A port needs a USB-A cable. We don’t carry one, so that port is for a cable you already own, such as the one that came with your earbuds.
More devices than ports: add a single-port charger
If your busiest hour has more than three devices, add a single-port charger on a second outlet.
- Anker Nano Charger (30W). One USB-C port, 30W max, in a body 1.12 inches thick. Our product page says Anker rates it to charge earbuds, phones, tablets and even a MacBook Air, and that it supports Samsung 25W Super Fast Charging. Cable not included.
- Anker 715 Charger (Nano II 65W). One USB-C port, 65W max. If a laptop lives at the station, giving it its own 65W charger keeps the 735’s ports free for phones and the tablet. Cable not included.
You’ll find all three chargers, plus the batteries below, in our Anker Chargers & Power collection.
Step 4: Pick cables by connector, length and color
Leave one cable plugged in for each device. Sharing one cable is how cables go missing.
Match the connector
- USB-C devices (iPhone 15 and later, USB-C Android phones, USB-C tablets and laptops): a USB-C to USB-C cable. The one that came with the device usually works.
- Lightning devices (iPhone 14 and earlier, Lightning iPads): the Anker 641 USB-C to Lightning Cable (Flow, Silicone). It’s MFi certified, and our product page notes it’s for Lightning devices only, not iPhone 15 and newer.
The 641 has a soft silicone finish and a 25,000-bend lifespan, per Anker, which suits a cable that gets plugged and unplugged every day by several people.
Choose the length for the spot
The 641 comes in 3 ft and 6 ft:
- 3 ft when the phone lies flat right next to the outlet. Less slack, less tangle.
- 6 ft when the outlet sits low or behind furniture, or someone wants to use the device while it charges.
A mix often works: 3 ft for a Lightning iPhone that charges flat, 6 ft for one that gets used while it charges. For USB-C devices, the cable from the box sets the reach, so place the station where it gets to a flat spot.
Color-code by person
When five cables sit side by side, color settles whose is whose. In stock on our store pages today:
- Anker 641 (6 ft): Midnight Black, Cloud White, Misty Blue, Mint Green and Lilac Purple. The 3 ft comes in Midnight Black and Cloud White.
- Anker Nano Charger (30W): Phantom Black, Aurora White, Natural Green, Misty Blue and Lilac Purple.
Give each person one color, or match a Nano charger to its cable. USB-C cables from the box won’t match, so wrap colored tape or a cable tag near each plug in its owner’s color.
Step 5: Add a grab-and-go battery
A magnetic battery that lives at the station, charged and ready, covers the day a phone goes out half full.
- Anker 622 Magnetic Battery (MagGo). 5,000mAh, 0.5 inches thin, with a fold-out kickstand. It snaps onto iPhone 12 and newer. Anker says it isn’t compatible with Android phones. It comes with a 60 cm USB-C to USB-C cable.
- Anker 633 Magnetic Battery. 10,000mAh, with magnetic wireless charging, a foldable stand, a 20W USB-C Power Delivery port and a USB-A port. Anker says devices can also charge from its USB-C and USB-A ports over a cable. It comes with a 2 ft USB-C to USB-C cable.
Both recharge over USB-C, so either can take a free port with the cable from its box. House rule: whoever takes it puts it back on the charger.
Choosing between the two? The 622 is the slimmer one at 0.5 inches; the 633 has 10,000mAh to the 622’s 5,000mAh and adds a USB-A port.
Don’t forget the car
For the school run and the commute, the Anker PowerDrive III Duo has two USB-C ports, 20W max per port, per Anker, so a driver and a passenger can both charge. It doesn’t come with cables, so keep a Lightning or USB-C cable in the car for each phone.
A note on cable ratings
Some USB-C cables are sold with a power rating. The general rule is simple: the charger, the cable and the device each have a ceiling, and the lowest of the three sets how much power gets through. If a cable’s packaging or listing states a rating, check that it covers what your charger and device can use. If no rating is stated, don’t assume one.
That includes the cables your devices came with: if one isn’t marked, don’t guess. For phones and tablets at a family station, the bigger factors are usually how many devices share the charger and which port each one uses, covered in Step 3.
Step 6: Set a few house rules
- Cables stay put. Need one for a bag or the car? Get a second cable for that job.
- Charge on the way in.
- Let the phone manage overnight charging. Apple says Optimized Battery Charging is on by default and is designed to reduce the time your iPhone spends fully charged. On iPhone 15 and later you can also set a charge limit between 80 and 100 percent in Settings > Battery > Charging.
- Take off a case if the phone gets hot. Apple says charging inside certain styles of cases may generate excess heat, and to take the device out of its case first if it gets hot while charging.
- Retire damaged cables. If a cable’s jacket is split or a connector is bent, replace it.
Two example setups
A family of four with mixed phones
- One Anker 735 for the tablet and two phones.
- One Anker Nano Charger (30W) on a second outlet for the fourth phone. If that’s a Galaxy, the Nano 30W supports Samsung 25W Super Fast Charging, per our product page.
- A 641 for each Lightning iPhone, in that person’s color. Each USB-C phone and the tablet uses its own USB-C to USB-C cable, tagged in its owner’s color.
- An Anker 633 for whoever is out longest that day.
A laptop lives at the station too
- One Anker 715 for the laptop, so it never competes with phones for power.
- One Anker 735 for phones and the tablet.
- The laptop’s own USB-C charging cable on the 715. If it reaches, the laptop can sit on the table rather than at the outlet.
- A 6 ft 641 for anyone with a Lightning iPhone who likes to use it while it charges.
What it costs
Here’s everything mentioned above, at our prices today:
| Product | Role at the station | Price* |
|---|---|---|
| Anker 735 Charger (Nano II 65W) | Center of the station: two USB-C, one USB-A | $29.99 |
| Anker 715 Charger (Nano II 65W) | Dedicated charger for a laptop | $29.99 |
| Anker Nano Charger (30W) | One more phone or tablet | From $15.99 (by color) |
| Anker 641 USB-C to Lightning (Flow, Silicone) | Cable for Lightning devices | 3 ft $17.99 · 6 ft from $16.99 (by color) |
| Anker 622 Magnetic Battery (MagGo) | Slim grab-and-go battery for iPhone | $47.99 |
| Anker 633 Magnetic Battery | Bigger grab-and-go battery, wired or wireless | $45.99 |
| Anker PowerDrive III Duo | Two phones in the car | $19.99 |
| A USB-C to USB-C cable | Cable for each USB-C device | Use the one that came with the device |
*Prices as of Oct 20, 2026.
Wondering whether a 30W charger is enough for a tablet or laptop? Our is a 30W charger enough guide covers it.
Family charging station checklist
- List every device and its port: USB-C, Lightning or an older USB-A cable.
- Plan for the busiest hour, not the total number of devices.
- Pick one spot near an outlet, out of the sun and away from heat, the sink and the stove.
- Start with a multi-port charger like the Anker 735 and put the hungriest device on USB-C 1.
- Add a single-port charger for each device beyond three: a Nano 30W for a phone or tablet, a 715 for a laptop.
- Leave one cable per device, matched by connector: a 641 for each Lightning iPhone, 3 ft or 6 ft by distance, and each USB-C device’s own USB-C to USB-C cable. One color or tag per person.
- Keep a magnetic battery charged at the station for whoever heads out.
- Set house rules: cables stay put, charge on the way in, take off a case if the phone gets hot.
FAQ
Can one charger handle the whole family?
It depends on how many devices charge at once. The Anker 735 has three ports and shares 65W across them. If more than three devices need power at the same time, add a single-port charger on a second outlet.
Why does a phone charge slower when three devices are plugged into the 735?
The 735 divides its power. With all three ports in use, Anker lists USB-C 1 at 40W max and USB-C 2 and USB-A at 12W max each. Unplug one device and the others get a bigger share.
Do I need to buy a new cable for a USB-C phone or tablet?
Usually not. If the device came with a USB-C to USB-C cable, that one works at the station. Keep it there and tag it in its owner’s color.
Is it OK to leave phones on the charger overnight?
Apple says Optimized Battery Charging, on by default, is designed to reduce the time an iPhone spends fully charged, and iPhone 15 and later also offer a charge limit setting. For other phones, check the maker’s battery settings.
Shop the family charging station
Start with the Anker 735 and a cable for each device: the 641 for Lightning, and the cable that came with each USB-C device. Then browse Chargers & Cables for the rest.
Anker tech ships free to the contiguous U.S., no minimum. 30-day returns, conditions apply.
Device and battery guidance is from Apple’s support pages as of Oct 19, 2026, and can change. Product specs are from Anker’s U.S. product pages and our own product pages. Coastal Tech Supply Co. is an independent retailer. Featured photo: Santeri Viinamäki, CC BY-SA 4.0 (via Wikimedia Commons), cropped, resized and color-adjusted.